It is a wastage of money and time to order a wrong roller shutter part. The same model may appear as like a component but its measurements, fittings, or operating mechanisms are quite different from another identical one.
Before you order, spend two minutes finding out the brand and model of your own shutter! This will make it a lot easier to search for your replacement correctly!
Start with the Shutter Itself
The shutter should be the first stop on your investigation list. Identification labels are usually located on the housing, side guides, or inside the access panel by manufacturers.
Look for:
- Brand names or logos
- Model numbers
- Serial numbers
- Product codes
- Manufacturing labels
- Installation stickers
Snap a photo of any label you can find clearly. Faded text may even offer some helpful hints when cross-referencing replacement components.
Checking the original paper can also prove useful if you have a roller shutter in Adelaide. At times, exact product model details are available with certificates of installation or invoices and manuals.
Check the Motor and Controls
Motors or their control units also have other identification characteristics associated with availability as motorised shutters. Do not remove electrical components just to get a model number.
Instead, inspect visible labels carefully. A tag on a manufacturer name, the type of motor, or product code.
Remote control can be a bit of a giveaway too. Certain brands might be utilising certain remote designs that can give a trace of the system. Although, the remote may not necessarily provide a confirmation on the exact shutter model.
Measure Before Ordering
Measurements are just as important as brand info. When replacement parts are needed, they tend to have to be either an exact match or nearly identical with the existing shutter.
It may be necessary to record, depending on the component:
- Shutter width and height
- Slat or curtain profile
- Guide dimensions
- Shaft size
- Lock dimensions
- Motor specifications
Instead of memorising, measure with a tape measure and note down the measurements.
Take Detailed Photos
Striking images are another category that you should be covering as they make identification a breeze. Send a general photo instead of sending from various angles.
Enterprise full shutter, side guides, bottom rail, control equipment, and any visible fittings. Detail shots may also reveal shape through clips, locks, and brackets.
Most suppliers can even compare the original part with a replacement based on good photos so that you can find roller shutters parts in Adelaide.
Look Through Your Old Documents
If you purchased or installed the shutter less than one year ago, look for your original invoice or installation information. Any paperwork that comes with it may have the name of the manufacturer, model number, and specifications.
For aging shutters, consult former owners or the installer for any existing documentation.
Do not just guess based primarily on an appearance. Same designs can be made by different manufacturers.
Ask Before You Order
An experienced supplier should also be able to assist in verifying compatibility. Instead of just saying it’s a roller shutter lock or following the logic that it says on the description as shutter motor, they are just about writing as much information as you can.
Providing the necessary model and measurements when ordering roller shutters parts in Adelaide minimises the chances of going for an unsuitable item.
Make Identification Your First Step
You just need to find the right brand and model without worrying. Look at the labels, examine the outer components, measure your snap, and keep all of your original documents.
Be it multiple roller shutters Adelaide property or just one, accurate identification will greatly simplify replacement tasks.
Taking a few minutes to verify that the details are correct before going ahead and placing your order could save you from receiving an incorrect part or one that is incompatible, does not fit right, does not work as it should and/or looks different than the shutter you have.